HM-1000-HARV-E HYDROSEEDER

The front platform and the flush tank shown above are optional.

The HM-1000-HARV-E, is a 1000 gallon hydroseeder with mechanical (paddle) agitation.  It is available as both a skid type and a pull type system. It will seed 13,000 square feet per load. It is equipped with an 27 H. P. Kohler Command Pro  electric start engine, a hydraulically driven paddle agitation that is reversible and also has adjustable speed.   It has a hydraulically driven reversible Bowie gear pump.

The HM-1000-HARV-E  has a long life poly tank that eliminates rust and makes clean up quick and easy. The aggressive paddles allow It to mix heavy slurries of any hydro seeding materials including Bonded Fiber Matrix products (BFM’s)  FGM’s such as Flexterra and 100% wood mulches.    The poly tank allows much faster clean up and will eliminate the major problem with many mechanical hydroseeders, “Rust”

The HARV-E will handle up to 450 pounds of paper mulch and up to 360 pounds of 100% virgin wood fiber mulch  It will pump through up to 500′ of hose.  It is capable of sell filling from a pond or a stream with the optional fill hose.   Mixing is mechanical with an aggressive 16 paddle agitator.  A major advantage of the unit is the poly tank.  Poly tanks are totally rust resistant.   One of the major problems with mechanical hydroseeders or hydromulchers is their susceptibility to rust.  Even with a stainless steel tank rust is an issue and will start in the welds.

The HM-1000-HARV-E comes with 100′ of 1 1/2″ discharge hose with free flow couplings, a  gun and three nozzles ( 1 wide hydro seeding nozzle, 1 straight distance nozzle, and 1 trim nozzle). The HARV-E comes standard with the front platform and multi position platform gun.  The empty weight of the unit is 2500 pounds. the loaded weight is 10,500 pounds. the physical dimensions are 88″W x 150″L x 78″H. The size of the skid frame on this unit is 61″W x 150″L.

The HM-1000-HARV-E is ideal for doing residential and commercial seeding, roadside work, erosion control work, and any hydroseeding job  Full bales can be loaded into the units.  Mixing time is 2 – 20 minutes.  Discharge distance with the straight nozzle is approximately 60′. The spray distance with the 2″ platform gun is 90′.