TURBO TURF HM-750-T HYDROSEEDER
The new Turbo Turf HM-750-T hydroseeder will play with the toughest materials and make the hardest hydroseeding job a snap. The aggressive paddle agitation allows you to load full bales without the need to break them up. The positive displacement Bowie gear pump allows you to spray thick slurries of any hydro seeding or erosion control mulch through up to 500 feet of hose.
Never worry about rust again. Turbo Turf’s poly tank can never rust and comes with a 20 year pro rated warranty. While others scrape, sand and recoat their metal tank units you can be doing more productive things. The HM-750-T is designed so that the rugged poly tank serves only as a carrier for the slurry. All moving parts are supported by heavy structural steel which has no contact with the fluids. Turbo Turf’s mixing system is made to last and to have the lowest maintenance requirements of any unit on the market.
The Turbo Turf HM-750-T hydroseeder is the best value in the industry with standard features like the front loading and spraying platform, the ability to draw water from a pond or stream (suction hose not included). These standard features add thousands of dollars to competitive units. The Turbo Turf HM-750-T features the best performance and best value in the industry.
Many in the industry saw the concept of a paddle (mechanically agitated) hydro seeding system using a “PLASTIC” tank as having great potential. Early attempts by others involved hanging a bearing on the plastic tank and this approach did not work well. Turbo Turf took a whole new approach. The bearings and agitator shaft are supported completely by heavy structural steel supports and the tank is used for nothing but holding the material. There is no stress whatsoever on the tank and the entire mixing system would run without the tank even being present. This system has now been on the market for several years without a single failure. The system is so reliable that Turbo Turf has introduced a 20 year pro rated tank warranty on mechanical units such as the HM-750-T.
The HM-750-T will seed 11,000 square feet per load. It is equipped with a 20 H. P. Honda electric start engine that also drives the 2″ Bowie Positive Displacement Gear Pump. The platform and tower gun are standard equipment. Standard equipment includes 100′ of 1 1/2″ I.D. hose with free flow couplings mounted on hose holders on the side of the tank. Electric or manual rewind hose reels are available as an option It also includes 3 nozzles (1 wide, 1 medium and one straight nozzle) for the hose and one for the platform gun.
The HM-750-T has an empty weight of 1900 pounds. the loaded weight is 7900 pounds. the physical dimensions are 75″W x 150″L x 90″H. The size of the skid frame is 60″W x 150″L. It will seed an area of 11000 sq. ft. per load. Maximum materials are 300 pounds of 100% wood mulch, 340 pounds of paper (cellulose) mulch or 400 pounds of pelletized mulch. Time to spray a load from the tower is about 11 minutes with a spray distance of up to 100′ Time to spray a load with the hose is about 20 minutes. The HM-750-T will handle any hydroseeding material including paper mulch, wood mulch, blended mulch, BFM’s FGM’s such as Flexterra and Biotic Earth. Any seed may be used and any fertilizer including granular, water soluble or liquid.
|Tank Capacity||750 Gallons|
|Engine||20 H.P. Honda|
|Pump||2300 series Bowie positive displacement gear pump|
|Skid Size||60″ x 150″|
|Overall size||75″ x 152″ x 90″|
|Coverage (sq. ft)||11,000 sq. ft.|
|Empty Weight||1900 pounds|
|Loaded Weight||7900 pounds|
|Standard Hose||100 feet of 1 1/2″ hose|
|Platform||Front platform and gun std.|
|Hydroseeding Material||Paper or wood mulch, blends, BFM’s, Flexterra|
Watch our video on our mechanically agitated hydroseeders.