TURBO TURF HS-400-XPW HYDRO SEEDING SYSTEM

Seed 5,300 sq. ft. per load
Mix in minutes, spray a load in 20 minutes
More pressure control for great trimming.
Molded in bale tray makes loading easy.
Bigger more powerful jets than other units
Clean up in minutes at the end of the day.
Few moving parts and low maintenance.
Easy to run. Learn how in minutes.
The HS-400-XPW, is a 400 Gallon, hydroseeder that can seed 5300 square feet per load. It is equipped with an 19 H. P. Kohler Command Pro electric start engine that is dectly coupled to a 4″ X 4″, 640 G. P. M. high volume centrifugal pump. The unit comes with 100′ of 1 1/4″ discharge hose, gun and 3 nozzles ( 1 wide hydro seeding nozzle, 1 medium nozzle and one straight nozzle). The standard Jet “Bale Buster” allows you to add mulch in big clumps and will quickly break them up. The empty weight of the unit is 800 pounds. the loaded weight is 3970 pounds. the physical dimensions are 62″W x 94″L x 59″H. The size of the skid frame on this unit is 45″W x 94″L. This unit can be mounted on the back of a truck with sufficient load capacity or it can also be easily operated from a trailer. It is also available as a pull type unit.
The HS-400-XPW is ideal for a landscaper doing residential and commercial seeding with average jobs in the 2,000 sq. ft to one acre size. For larger jobs up to 2 acres can be seeded per day with a good water source. The fastest mixing is with a totally full load but mixing less than a full load is easy and fast. Seeding with the HS-400-XPW is very quick and material is applied at approximately 50 G.P.M. Time to spray a complete tank is about 15 minutes. Mixing time is 1-20 minutes depending on material. This unit comes with 100′ of discharge hose. It will easily handle an extra 100′ of hose. The spray distance with the straight nozzle is approximately 55′.
The HS-400-XPW features a 4″ X 4″ 640 gallon per minute 63 P.S.I. pump that was designed specifically for hydro seeding. The 2″ I.D. jets equipped with a quick coupler for easy service in the unlikely event of a problem, a quick disconnect for the discharge hose, and a bale tray for easy loading.
Typically materials used in one load would be 2 1/2 to 3 bales of hydro seeding mulch, the appropriate amount of seed for 5,300 sq. ft. (any seed will work in hydro seeding), and the appropriate fertilizer for 5,300 square feet (liquid, water soluble, or granular)
Like all TURBO TURF systems the HS-400-XPW, comes equipped with a long life poly tank that can never rust, the ability to mix partial loads, a simple but powerful design with few moving parts, continuous agitation, and the ability to control the flow at the gun without making adjustments at the unit. Prices quoted are a complete machine ready to operate. Trailers shown in the photo’s are optional.
Turbo Turf’s Hydro Seeding Systems have larger jets than most competitive units allowing them to will mix faster. Operators have full control of the flow which allows quicker mixing, more control when trimming and greater reach on hillsides.
This unit used a MIG-40 centrifugal pump with 640 gallons a minute of flow and 63 P.S.I. of pressure. This pump was designed specifically for hydro seeding. The housing material is cast and it is very low maintenance. There are no grease fittings and the only maintenance required is to winterize if at the end of the season if it is stored where temperatures go below freezing. The pump impeller mounds on the end of the engine shaft so there is no power loss. Typically it can operate for 5 to 10 years with no maintenance. The only thing to be careful of is to not run it dry.
This unit comes with a 19 H.P. Kohler Command Pro electric start engine. This has proved to be a very reliable engine with a long life. The engine has a two year warranty and service for the engine is available at any authorized Kohler engine dealer.
This unit comes standard with 100 ft of 1 1/4″ I. D. hose. The hose we use is both strong and light weight. It is made from a poly material with a spiral reinforcement. Additional hose is available in 50 feet or 100 feet sections. The unit will handle up to 250 feet of hose.
This unit comes equipped with a bale tray that is molded into the tank. The opening is 16″ with a hinged fill lid. The bale tray makes it easy to add mulch and other materials with a minimum of spillage. Minimizing wasted material can add up to big savings over time. There is also a second 12″ hinged lid which allows two people to load or makes a good spot for a hose so it is out of your way while filling.
The HS-300-EH-P is permanently attached to a DOT approved double axle trailer with brakes on both axles, DOT lighting, a breakaway, safety chains and an on-board test box for the breakaway battery. The trailer has a GVW of 7000 pounds and is 14’2″ long an 84″ wide. It is available with either a 2 5/16″ ball hitch or a pintle hitch.
WATCH OUR OPERATION VIDEO
Watch our Guide to operating a Turbo Turf Hydro Seeding System to see how easy it really is to operate our units.
Turbo Turf HS-400-XPW
- Skid type unit, plus freight
- The shopping cart will not automatically add freight charges. We contact a large number of freight companies and use our large discounts to get the best shipping rates possible. We will not charge your card until we are ready to ship and will contact you with the exact charges for your approval before we charge your card.
HS-400-XPW-P
- Trailer style unit, plus freight
- The shopping cart will not automatically add freight charges. We contact a large number of freight companies and use our large discounts to get the best shipping rates possible. We will not charge your card until we are ready to ship and will contact you with the exact charges for your approval before we charge your card.
Contact us for a freight quote or with any questions about our machines or hydro seeding.
Need to view your cart before checking out or want to check your order.
Turbo Turf Hydroseeders come with 100 feet of hose and three nozzles. Everything you need to put it to work. If you would like to check what options are available or need extra hose visit our options page