TURBO TURF HS-300-EH  HYDROSEEDER

Turbo Turf's HS-300-EH Hydroseeder

  • Seed 4,000 sq. ft. per load

  • Mix in minutes, spray a load in 20 minutes

  • More pressure control for great trimming.

  • Molded in bale tray makes loading easy.

  • Bigger more powerful jets than other units

  • Clean up in minutes at the end of the day.

  • Few moving parts and low maintenance.

  • Easy to run.  Learn how in minutes.

The HS-300-EH, is a 300 Gallon, skid type hydroseeder. It will seed 4000 square feet per load. It is equipped with an 13 H. P. Honda electric start  engine that is directly coupled to a 3″ X 3″, 333 G. P. M. high volume centrifugal pump. The unit comes with 100′ of 1 1/4″ discharge hose, gun and 3 nozzles ( 1 wide hydro seeding nozzle, 1 medium  nozzle and one straight nozzle).  The empty weight of the unit is 715 pounds. the loaded weight is 3100 pounds. the physical dimensions are 62″W x 93″L x 52″H. The size of the skid frame on this unit is 45″W x 94″L. This unit can be mounted on the back of a truck with sufficient load capacity or it can also be easily operated from a trailer.

The HS-300-EH is an ideal hydroseeder for a landscaper doing residential and commercial seeding with average jobs in the 2,000 sq. ft to one acre size. For larger jobs up to 2 acres can be seeded per day with a good water source.   The fastest mixing is with a totally full load but mixing less than a full load is easy and fast.  Seeding with the HS-300-EH is very quick and material is applied at approximately 50 G.P.M. Time to spray a complete tank is about 15 minutes. Mixing time is 1-20 minutes depending on material. This unit comes with 100′ of discharge hose. It will easily handle an extra 100′ of hose. The spray distance with the straight nozzle is approximately 55′.

The HS-300-EH features a 3″ X 3″  333 gallon per minute 72 P.S.I. pump that was designed specifically for hydro seeding.  The 2″ I.D. jets equipped with a quick coupler for easy service in the unlikely event of a problem, a quick disconnect for the discharge hose, and a bale tray for easy loading.

Typically materials used in one load would be 2 to 3 bales of hydro seeding mulch, the appropriate amount of seed for 4,000 sq. ft. (any seed will work in hydro seeding), and the appropriate fertilizer for 4,000 square feet (liquid, water soluble, or granular)

Like all TURBO TURF systems the HS-300-EH, comes equipped with a long life poly tank that can never rust, the ability to mix partial loads, a simple but powerful design with few moving parts, continuous agitation, and the ability to control the flow at the gun without making adjustments at the unit. Prices quoted are a complete machine ready to operate. Trailers shown in the photo’s are optional.

Turbo Turf’s Hydro Seeding Systems have larger jets than most competitive units allowing them to will mix faster.  Operators have full control of the flow which allows quicker mixing, more control when trimming and greater reach on hillsides.

Specifications

Tank Capacity 300 Gallons
Engine 13 H.P. Honda Electric Start
Pump 3″x 3″ centrifugal with 333 GPM and 72 P.S.I
Skid Size 45″ x 92″
Overall size 62″ x 93″ x 52″
Coverage (sq. ft) 4,000 sq. ft.
Empty Weight 715 pounds
Loaded Weight 3100 pounds
Standard Hose 100 feet
HS-300-EH Turbo Turf Hydroseeder right front view
Turbo Turf HS-300-EH Hydroseeder rear view
Turbo Turf's hydroseeding pump has more pressure
Turbo Turf Hydroseeders have larger jets than others
Turbo Turf's hoses are lightweight and don't kink

WATCH OUR OPERATION VIDEO

Watch our Guide to operating a Turbo Turf Hydro Seeding System to see how easy it really is to operate our units.

Turbo Turf HS-300-EH

$ 7,99500
  • Skid type unit, plus freight
  • The shopping cart will not automatically add freight charges. We contact a large number of freight companies and use our large discounts to get the best shipping rates possible. We will not charge your card until we are ready to ship and will contact you with the exact charges for your approval before we charge your card.
ADD TO CART

HS-300-EH-P

$ 13,99500
  • Trailer style unit, plus freight
  • The shopping cart will not automatically add freight charges. We contact a large number of freight companies and use our large discounts to get the best shipping rates possible. We will not charge your card until we are ready to ship and will contact you with the exact charges for your approval before we charge your card.
ADD TO CART

This unit used a MIG-30 centrifugal pump with 333 gallons a minute of flow and 72 P.S.I. of pressure.  This pump was designed specifically for hydro seeding.  The housing material is cast and it is very low maintenance.   There are no grease fittings and the only maintenance required is to winterize if at the end of the season if it is stored where temperatures go below freezing.  The pump impeller mounds on the end of the engine shaft so there is no power loss.   Typically it can operate for 5 to 10 years with no maintenance.  The only thing to be careful of is to not run it dry.

This unit comes with a 13 H.P. Honda electric start engine.  This has proved to be a very reliable engine with a long life.  The engine has a two year warranty and service for the engine is available at any authorized Honda engine dealer.

This unit comes standard with 100 ft of 1 1/4″ I. D. hose.   The hose we use is both strong and light weight.  It is made from a poly material with a spiral reinforcement.   Additional hose is available in 50 feet or 100 feet sections.  The unit will handle up to 200 feet of hose.

This unit comes equipped with a bale tray that is molded into the tank.  The opening is 16″ with a hinged fill lid.  The bale tray makes it easy to add mulch and other materials with a minimum of spillage.   Minimizing wasted material can add up to big savings over time.

The HS-300-EH-P is permanently attached to a DOT approved double axle trailer with brakes on both axles, DOT lighting, a breakaway, safety chains and an on-board test box for the breakaway battery.  The trailer has a GVW of 7000 pounds and is 14’2″ long an 84″ wide.   It is available with either a 2 5/16″ ball hitch or a pintle hitch.

Contact us for a freight quote or with any questions about our machines or hydro seeding.

Contact Us

Need to view your cart before checking out or want to check your order.

View Shopping Cart

Turbo Turf Hydroseeders come with 100 feet of hose and three nozzles.  Everything you need to put it to work.  If you would like to check what options are available or need extra hose visit our options page

Options